Computer Stand - Lenovo ThinkCentre neo 30a 27 Gen 3 User Manual

For access, do the following:
1. Turn off the computer and remove all connected devices and cables.
2. Disconnect the computer from ac power and all connected cables.
3. Place a soft, clean towel or cloth on the desk or surface. Hold the sides of your computer and gently lay
it down so that the screen is against the surface and the computer cover is facing up.
4. Remove the smart cable clip. See "Smart cable clip (for selected models)" on page 26.
Removal steps
• Type 1
• Type 2 (for selected 24-inch models only)

Computer stand

Prerequisite
Before you start, read Generic Safety and Compliance Notices, and print the following instructions.
For access, do the following:
1. Turn off the computer and remove all connected devices and cables.
.
Chapter 7 CRU replacement
27