Table of Contents
Advertisement
To cancel Program Play
Press PLAY MODE repeatedly until
"PROGRAM" or "SHUFFLE" disappears
from the display.
To
Check the
program
Clear a track from
the end
Clear a specific
track
Add a track to the
program
Clear the entire
program
Tips
• The program you made remains in the system's
memory even after it has been played back. Press
CD, then press hH to play the same program
again.
• If "--.--" appears instead of the total playing time
during programming, this means:
– you have programmed a track number
which exceeds 20.
– the total playing time has exceeded 100 minutes.
Downloaded from:
Press
CHECK on the remote
repeatedly. After the last
track, "CHECK END"
appears.
CLEAR on the remote in
stop mode.
CHECK on the remote
repeatedly until the
number of the track to be
erased appears, then press
CLEAR.
1 Select the disc tray with a
DISC 1~3 button.
2 Select the track by
pressing ./>.
3 Press ENTER.
x once in stop mode or
twice during playback.
https://www.usersmanualguide.com/
25
Advertisement
Table of Contents
