Economical Solutions - Samsung 3 Series User Manual

✎
The USB option can be selected if a USB device is connected to the TV.
✎
To select a source other than TV or USB, you must perform the following:
Connect the cable or satellite set-top box to the AV port.
•
Tune the set-top box to the channel you wish to display.
•
Turn on the set-top box.
•
✎
If a source other than TV or USB is selected. The Antenna and Channel options disappear.
Antenna (when the Source is set to TV): Select Air or Cable.
Channel (when the Source is set to TV): Select the desired channel.
Music / Photo (when the Source is set to USB): Select a folder in the USB device containing the music or
photo files you want to play when the TV turns on automatically.
✎
If there is no music file on the USB device or you don't select a folder containing a music file, the
Timer function does not operate correctly.
✎
If there is only one photo file in the USB, the Slide Show will not play.
✎
A folder with a name that is too long cannot be selected.
✎
Each USB device you use is assigned its own folder. When using more than one of the same type
of USB device, make sure the folders assigned to each USB device have different names.
✎
It is recommended that you use a USB memory stick and a multi card reader when using On
Timer.
✎
The On Timer function may not work with USB devices with a built-in battery, MP3 players, or
PMPs made by some manufacturers because these devices take a long time to be recognized.
Off Timer: You can set up three separate Off Timer configurations. (Off Timer 1, Off Timer 2, Off Timer 3)
•
✎
You must set the clock before you can use Off Timer.
Setup: Select Off, Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun or Manual. If you select Manual, you can
choose the days you want Off Timer to turn off your TV.
✎
The mark indicates days you've selected.
c
Time: Set the hour, minute, and am/pm. Use the number buttons or the
Use the buttons to change entry fields.
l/r
Eco Solution
■
O
MENUm → System → Eco Solution →
Energy Saving (Off/Low/Medium/High): Lets you adjust the brightness of the TV in order to reduce
•
power consumption.
No Signal Power Off (Off / 15 min. / 30 min. / 60 min.): Sets how quickly the TV switches to standby
•
mode if it is receiving no signal.
✎
Disabled when an attached PC is in power saving mode.
Auto Power Off: The TV will automatically turned off when no user operation is received for 4 hours.
•
✎
If the Auto Power Off option is set to Off, the TV will stay on even if no operations are performed
on the TV.

Economical Solutions

ENTERE
English - 32
buttons to enter numbers.
u/d