Watchguard XTM 850 Hardware Manual page 14

Hardware Specifications
Use the LCD Interface in Normal Mode
The XTM 800 Series device automatically boots in normal mode, unless you specifically put it in safe mode. To
operate, the device uses the installed Fireware XTM OS and the rules in the configuration file you have saved
to the device.
You can use the four arrow buttons to see information about the device on the LCD screen. In normal mode,
you use the buttons to navigate the hierarchical LCD interface menu.
In normal mode, the LCD interface menu includes these items:
Hardware Monitor
XTM device model number
XTM device serial number
CPU temperature
CPU temperature and system temperature
CPU fan status
Case cooling fan speeds for the four device fans
Voltage
CPU core voltage, the battery voltage, and the 3.3V power supply voltage
Configuration Information
IP addresses and subnet masks assigned to each interface on the device
Default gateway
Appliance Software Information
OS type
Fireware XTM build number
Uptime
Time interval since the device was last restarted
Time interval since a configuration was saved to the device
Load
Load average, shows the average system load for the past 1, 5, and 15 minutes
Memory usage
Current memory use on the XTM 800 Series device
To navigate the LCD interface menu:

To move forward through the list of categories, press the Right Arrow button.

To move up and down in the menu and see information in a category, press the Up Arrow and Down
Arrow buttons.
To stop the auto-cycle of the LCD screen, press any button.
12 WatchGuard XTM 800 Series