Table of Contents
Advertisement
To activate the function for a cooking zone:
touch
.
comes on.
To deactivate the function: change the heat
setting.
TIMER
Count Down Timer
You can use this function to set how long the
cooking zone should operate for a single cooking
session.
First set the heat setting for the cooking zone then
set the function.
To set the cooking zone: touch
again until the indicator of a necessary cooking
zone comes on.
To activate the function or change the time:
touch
or
of the timer to set the time (00 - 99
minutes). When the indicator of the cooking zone
starts to flash slowly the time counts down.
To see the remaining time: set the cooking zone
with
. The indicator of the cooking zone starts to
flash quickly. The display shows the remaining time.
To deactivate the function: set the cooking zone
with
and touch
. The remaining time counts
back to 00. The indicator of the cooking zone goes
out.
When the time comes to an end, the
sound operates and 00 flashes. The
cooking zone deactivates.
To stop the sound: touch
Minute Minder
You can use this function as a Minute Minder
when the hob is activated and the cooking zones
do not operate. The heat setting display shows
To activate the function: touch
of the timer to set the time. When the time
comes to an end, the sound operates and 00
flashes.
To stop the sound: touch
The function has no effect on the
operation of the cooking zones.
PAUSE
This function sets all cooking zones that operate to
the lowest heat setting.
When the function operates, all other symbols on
the control panels are locked.
10
again and
.
.
. Touch
or
.
The function does not stop the timer functions.
Touch
to activate the function.
comes on. The heat setting is lowered to 1.
To deactivate the function, touch
heat setting comes on.
LOCK
You can lock the control panel while cooking zones
operate. It prevents an accidental change of the
heat setting.
Set the heat setting first.
To activate the function: touch
for 4 seconds. The Timer stays on.
To deactivate the function: touch
previous heat setting comes on.
When you deactivate the hob, you also
deactivate this function.
CHILD SAFETY DEVICE
This function prevents an accidental operation of
the hob.
To activate the function: activate the hob with
. Do not set any heat setting. Touch
seconds.
comes on. Deactivate the hob with
.
To deactivate the function: activate the hob with
. Do not set any heat setting. Touch
seconds.
comes on. Deactivate the hob with
.
To override the function for only one cooking
time: activate the hob with
Touch
for 4 seconds. Set the heat setting in
10 seconds. You can operate the hob. When you
deactivate the hob with
again.
POWER MANAGEMENT
•
Cooking zones are grouped according to the
location and number of the phases in the hob.
See the illustration.
•
Each phase has a maximum electricity loading of
3700 W.
•
The function divides the power between
cooking zones connected to the same phase.
•
•
The function activates when the total electricity
loading of the cooking zones connected to a
single phase exceeds 3700 W.
. The previous
.
comes on
. The
for 4
for 4
.
comes on.
the function operates
Advertisement
Table of Contents
