Sony Handycam DCR-SR100 Application Manual page 7

7
Read [License Agreement], check
[I accept the terms of the license
agreement] when you agree, then
click [Next].
8
Select where to save the software,
then click [Next].
9
If your camcorder's model name is
the DCR-SR100, select "NTSC". If
your model name is the DCR-
SR90E/SR100E, select "PAL," then
click [Next].
• To check the model name of your camcorder,
see the cover page of "Camera Operating
Guide".
10
Click [Install] on the [Ready to
Install the Program] screen.
The installation of "ImageMixer for
HDD Camcorder" starts.
11
If the [Installing Microsoft (R)
DirectX (R)] screen is displayed,
follow the steps below to install
DirectX 9.0c. If not, skip to step
12.
1 Read [License Agreement], then click
[Next].
2 Click [Next].
Continued ,
7