Supported Ata Call Features - Cisco ATA 191 User Manual

Supported ATA call features

Feature
Speed dial.
Supplementary services.
Distinctive ring
Ring setting
Supported ATA call features
Depending on your system configuration, your ATA supports some or all the following call features:
• Transfer (attended or supervised)—In this type of transfer, you talk to the receiving party before you
• Transfer (unattended or unsupervised)—In this type of transfer, you complete the transfer and hang up
• Conference.
• Hold and Resume.
• Caller ID.
• Call Waiting.
• Call Pickup.
• Speed Dial.
• Music On Hold.
• Shared Lines.
Cisco ATA 191 and ATA 192 Analog Telephone Adapter User Guide for Multiplatform Firmware
8
complete the transfer.
before the receiving party answers.
Description
You assign phone numbers to a line so that you can
quickly call that person.
For more information, see Speed Dial Settings, on
page 16 and Set Up Phone Features with Phone
Adapter Configuration Utility, on page 14
Configure such features as Call waiting, Do not
disturb, or Called ID.
For more information, see Supplementary Service
Settings, on page 17 and Set Up Phone Features with
Phone Adapter Configuration Utility, on page 14
You can assign a specific ring to a phone number or
line.
For more information, see Distinctive Ring Settings,
on page 18 and Set Up Phone Features with Phone
Adapter Configuration Utility, on page
You can assign a specific ring to a certain situation
such as when a call is on hold or during a call back.
For more information, see Ring Settings, on page 18
and Set Up Phone Features with Phone Adapter
Configuration Utility, on page
Your ATA
14.
14.