Toshiba Excite 10 AT300 User Manual page 23

2.
3.
You can charge the tablet by connecting the power cable to a USB port on
a computer. However it is not recommended because it takes much longer
time to fully charge the battery.
Turning on the power
This section describes how to power up your tablet.
Press & hold Power button to turn on the tablet. The tablet will vibrate to
indicate the status.
Initial Setup
The Setup Screen will be the first screen displayed when you turn on the
power. Setup your tablet according to the following steps:
1.
2.
3.
4.
5.
User's Manual
Plug the power connector of the power cable into the docking interface
on your tablet.
Figure 3-4 Connecting the AC adaptor 2
Plug the AC adaptor into a live wall outlet.
Choose your preferred system language and tap Start to start the
initial setup process.
Connect to a Wi-Fi network.
You can tap Skip and turn Wi-Fi on later in Settings app.
Set date and time or enable automatic date & time and tap Next to
continue.
Register or sign in with a Google™ account. You can also skip this
step by tapping Not now.
Choose whether to use Google Location Service™ and tap Next to
continue.
Figure 3-5 Turn on the tablet
3-9