Creating A Video Cd (Direct Access To Video Cd Burn) - Picture Package Vcd Maker - Sony Handycam DCR-HC1000 Application Manual

6
Click [Write to CD-R].
.
Place a new CD-R in the disc drive.
Note
b
• CD-RWs cannot be used.
7
Click [Start].
Saving to a CD-R starts. The remaining
time appears on the computer screen.
.
8
Click [No] when you want to finish.
The disc tray comes out automatically.
.
24
Managing pictures on a Windows computer
To create another copy with the same
content, click [Yes], then place a new CD-
R in the disc drive.
Creating a Video CD (Direct
Access to Video CD Burn)
– Picture Package VCD Maker
You can copy recorded movies on a tape to a
Video CD using a computer equipped with a
disc drive compatible with CD-Rs.
The following procedure describes how to
create a Video CD from a picture recorded on a
tape (maximum length of about one hour).
Notes
b
• Some models are not compatible for this operation.
Regarding supported models, check to see if there is
a listing for the Burn VCD feature in the index of the
separate Camera Operations Guide.
• You can only use a USB cable for this operation.
You cannot use an i.LINK cable.
• You cannot save pictures from a tape directly onto
the hard disk drive of your computer.
1
Turn on the computer.
2
Prepare the power source for your
camcorder, then slide the POWER
switch repeatedly to select the PLAY/
EDIT mode.
Use the supplied AC Adaptor as the power
source since it takes a few hours to create a
Video CD.
The name of the power switch on the
camcorder varies depending on the model.
3
Set [USB STREAM] in the menu
settings of your camcorder to on.
The procedure of the menu settings varies
depending on the model.
4
Insert a recorded cassette into your
camcorder.