Connecting To Component Video Equipment - Sanyo PJLink PLC-WXU30K Owner's Manual

Connecting to Component Video Equipment

Cables used for connection
• Audio Cables
• Scart-VGA Cable
• Component Cable
• Component-VGA Cable
(Cabels are not supplied with this projector.)
RGB Scart 21- Component Video Output
pin Output
Component
cable
Scart-VGA
cable
Component-VGA
cable
COMPUTER IN 2/COMPONENT IN
KB3AC
✔Notes:
• When the AUDIO OUT is plugged-in, the projector's
built-in speaker is not available.
• See page 77 for ordering optional cables.
• RGB Scart signal cannot be output from the MONITOR
OUT terminal.
Audio Output
(Y, Pb/Cb, Pr/Cr)
Audio cable
(stereo)
COMPUTER/ COMPONENT
AUDIO IN
External Audio Equipment
Audio Input
SD
AUDIO OUT
(stereo)
Unplug the power cords of
both the projector and external
equipment from the AC outlet
before connecting cables.
Installation
Audio cable
(stereo)
1