Connecting To Component Video Equipment - Sanyo PLC-XU101 Owner's Manual

Connecting to Component Video Equipment

Cables used for connection
• Audio Cables
• Scart-VGA Cable
• Component Cable
• Component-VGA Cable
(Cables are not supplied with the projector.)
RGB Scart
21-pin Output
Component
cable
Scart-VGA
cable
COMPUTER IN 2/COMPONENT IN
✔Notes:
•When connecting the AUDIO OUT to external audio equipment,
the projector's built-in speaker is disconnected.
•See page 63 for ordering optional cables.
•RGB Scart signal cannot be output from the MONITOR OUT
terminal.
Component Video Output
(Y, Pb/Cb, Pr/Cr)
Component-
VGA cable
COMPUTER
/COMPONENT
AUDIO IN
Audio Output
Audio cable
(stereo)
AUDIO OUT
(stereo)
Unplug the power cords of both the
projector and external equipment from
the AC outlet before connecting cables.
Installation
External Audio Equipment
Audio Input
Audio cable
(stereo)
17