Specifications; Appliance Components - Rinnai Hotflo 25L Operation & Installation Manual

Vitreous enamel - electric hot water
Table of Contents

Advertisement

APPLIANCE COMPONENTS

1.
Data and Warning Labels
2.
Left cold water inlet
Connection RP 3/4" (20mm)
3.
Element + Thermostat Cover – Electrical supply connection
Removal & connection by qualified persons only, in accordance with AS/NZS 3000
4.
PTR valve drain pipe (Supplied by Installer)
Copper only drain in accordance with AS/NZS 3500.4
5.
Element + Thermostat Cover (Twin element models only)
Removal by qualified persons only
6.
Left hot water outlet
Connection RP 3/4" (20mm), use a union connection and insulate hot water pipe
7.
PTR valve connection
RP 3/4" (20mm), use supplied PTR Valve with 1/2" Reducing Bush
8.
Anode cap
9.
Duplicate PTR valve connection (25 and 50 litre models only)
10. Duplicate hot water outlet
11. Duplicate PTR valve drain pipe (Supplied by Installer)
12. Duplicate cold water inlet
13. Water heater support
In accordance with AS/NZS 3500.4
14. Safe Tray & drain (Not Supplied)
May be required to avoid property damage in accordance with AS/NZS 3500.4
*
RemovalandconnectionbyqualifiedpersonsONLY,inaccordancewithAS/NZS3000
ValveswithpressureratingsotherthanspecifiedareunsuitableandMUST NOTbeused.
NOTE
WATER HEATER - located closest to most frequently used outlet - Access for service in the
installed position.
Rinnai
7
8
6
5
4
3
2
1
14
9

SPECIFICATIONS

9
10
11
12
13
*
*
Hotflo Electric Storage Water Heater OIM

Advertisement

Table of Contents
loading

Table of Contents