Download Print this page
Cornelius Nordic Black/Gray Style Lid CCM522 Installation Instructions
Cornelius Nordic Black/Gray Style Lid CCM522 Installation Instructions

Cornelius Nordic Black/Gray Style Lid CCM522 Installation Instructions

Cornelius ice maker installation instruction

Advertisement

Quick Links

INSTALLATION INSTRUCTIONS

ED/DF150 22" CCM322/522 N
This Nordic style kit applies to the Cornelius 22" wide CCM322/522 ice maker.
Item No.
Part No.
52994
1
52934
2
15506
3
29565
4
70217
5
50904
6
90221
7
620204723INS
8
620701902
9
620701901
10
620042928
11
620701903
12
620505804
13
630500109
!
WARNING:
Disconnect power to the unit before installing the adaptor following all lockout/tag out procedures established by the
user. Verify that all the power is off to the unit before performing any work.
Failure to comply could result in serious injury, death or damage to the equipment.
!
WARNING:
All ice baffle plates and bin stats, if included or recommended in this kit, must be installed as directed in this manual or
the equipment manufacturer's instructions.
Failure to comply could result in serious injury, death or damage to the equipment.
!
WARNING:
All of the attachment screws and plates must be installed as directed in this manual.
Failure to comply could result in serious injury, death or damage to the equipment.
!
WARNING:
The dispenser must be secured with 3/8-16 bolts (6) to the counter before installing this Icemaker Adapter Kit. Refer
to the installation manual for the counter mounting template.
1. Unpack kit.
2. Place insulation strip (item 12) over studs on the baffle and insert baffle assembly into the adapter lid.
3. Place (2) sealing washers (item 9) over studs and (2) flat washers (item 11), then fasten in place with (2) plastic
acorn nuts (item 8).
4. Set ice maker lid on the top of the dispenser.
5. Using the slotted holes in the lid as a template, drill four (4) 0.140" diameter (9/64") holes at the bottom of the slots
(see detail A). Use extreme care not to drill into the hopper. Fasten the lid to the dispenser with four (4) #8 sheet
metal screws, two on each side.
Release Date: October 27, 2010
© 2007-2010, IMI Cornelius Inc.
ED/DF150 22" CCM322/522 Nordic Style Lid Kit Installation Instructions
B
ORDIC
LACK
Table 1. Supplied Loose Parts
Cover, Gray - 08008
Cover, Black - 02390
Lid Assembly
Bracket
#8 Screw
RTV
Label
Installation Instruction
Acorn Nut, 8-32 Nylon
Sealing Washer
Baffle, Ice DF/ED150
#8 Nylon Washer
Insulation Strip
Bin Stat
www.cornelius.com
- 1 -
/G
S
L
RAY
TYLE
ID
Name
Publication Number: 620204723INS
K
ITS
Qty.
1
1
1
2
6
1
1
1
2
2
1
2
1
1
Revision: B

Advertisement

loading

Summary of Contents for Cornelius Nordic Black/Gray Style Lid CCM522

  • Page 1: Installation Instructions

    INSTALLATION INSTRUCTIONS ED/DF150 22” CCM322/522 N This Nordic style kit applies to the Cornelius 22” wide CCM322/522 ice maker. Item No. Part No. 52994 52934 15506 29565 70217 50904 90221 620204723INS 620701902 620701901 620042928 620701903 620505804 630500109 WARNING: Disconnect power to the unit before installing the adaptor following all lockout/tag out procedures established by the user.
  • Page 2 8. Install the wire form bracket, supplied with the bin stat kit (item 4), through the 5/8” diameter hole in the bottom of the ice maker. Wrap the eye of the wireform over the stud near the hole to the end of the wireform bracket and wrap the tube around the end of the bracket several times, insuring the tube is secure.
  • Page 3 ED/DF150 22” CCM322/522 Nordic Style Lid Kit Installation Instructions Figure 2. ED/DF150 Kit © 2007-2010, IMI Cornelius Inc. - 3 - Publication Number: 620204723INS...
  • Page 4 IN FIGURE 3 BINSTAT COIL DETAIL X SCALE 0.580 NOTE: BINSTAT MUST BE WRAPPED AROUND SUPPORT AS SHOWN. Publication Number: 620204723INS Figure 3. Bin Stat SUPPORT Figure 4. Detail X - 4 - NOT SUPPLIED WITH BINSTAT © 2007-2010, IMI Cornelius Inc.