Operation
Using the Beacon
To turn on the beacon, press the bottom of the switch.
To shut off the beacon, press the top of the switch.
Note:
The ignition switch must be in position 1 for
the beacon to work.
Maintenance
Replacing the Fuse
Replacing the Fuse on Model
31654
1.
Remove the fuse-block cover
1. Fuse-block cover
2.
Remove the 10 A fuse from the slot in the fuse
block located at the 3rd position from the right
(Figure
29).
(Figure
28).
Figure 28
1. 10 A fuse
3.
Insert a 10 A fuse into the slot of the fuse block
located at the 3rd position from the right
29).
Important:
type and amperage as the one you are
replacing; otherwise, you could damage the
electrical system.
Note:
Ensure that the fuse is fully seated.
4.
Install the fuse-block cover
Replacing the Fuse on Models
31657 and 31659
1.
Remove the storage compartment; refer to
Removing the Storage Compartment (page
2.
Remove the fuse-block cover
g188141
g037069
1. Fuse block
3.
Remove the existing beacon light fuse and insert
a 10 A fuse in the same slot.
9
Figure 29
2. Fuse block socket (3rd
position from the right)
Always use a fuse of the same
(Figure
(Figure
Figure 30
2. Fuse-block cover
g188128
(Figure
28).
1).
30).
g328464