Detailed Backup Instructions
The following sections provide detailed information about the steps used to back up data.
Selecting a Source Drive and a Target Media Drive
To back up files, you must have at least one source drive and at least one target media drive.
The source drive contains the file(s) you want to back up.
The target media drive is the drive that will hold the backed-up files.
The Drives button on the left side of the StorageSync window lets you specify these drives.
When you click this button, the Drive Manager screen appears (see Figure 17). This screen
shows the source and target drives that are available, as well as their drive information. If you
have more than one drive, click the drive to view its information in the Drive Information
areas at the bottom of the screen.
38
Figure 17. Drive Management Screen
StorageSync User's Guide