Table of Contents
Advertisement
Place the holder in the middle of the
protective strip at the back of any
adjustable shelf so that it clicks into
position.
Touch the OK sensor to confirm that
the filters have been replaced.
The change charcoal filters indicator will
go out and the counter is reset.
The symbol will go out in the start
display.
Cleaning and care
Cleaning the front of the
appliance and the side panels
If soiling is left on for any length of
time, it may become impossible to
remove. Surfaces may suffer
discolouration or damage.
Therefore it is best to remove soiling
from the appliance doors and side
panels immediately.
All surfaces are susceptible to
scratching. Contact with unsuitable
cleaning agents can alter or
discolour the surfaces.
See the information on "Cleaning
agents" at the beginning of this
section.
Clean the surfaces with a clean
sponge and a solution of warm water
and washing-up liquid. A clean, damp
microfibre cloth without cleaning
agent can also be used.
After cleaning, wipe with clean water
and dry with a soft cloth.
CleanSteel (edt/cs) – appliance front
Risk of damage due to incorrect
cleaning.
The surface coating will be
damaged.
Do not use a stainless steel
cleaning agent on this surface.
The appliance front has a high quality,
special finish. It is resistant to soiling
and easy to clean.
65
Advertisement
Table of Contents
