Table of Contents
Advertisement
Cleaning and care
Place the holder in the middle of the
rear protective strip of any adjustable
shelf, so that it clicks into position.
Touch the OK sensor control to
confirm that the filters have been
replaced.
The "Replace charcoal filter" reminder
will go out on the display and the
counter will be reset.
The symbol will go out on the start
display.
64
Cleaning the front of the
appliance and the side panels
If soiling is left on for any length of
time, it may become impossible to
remove. Surfaces may suffer
discolouration or damage.
Therefore, it is best to remove soiling
from the appliance front and side
panels immediately.
All surfaces are susceptible to
scratching. Contact with unsuitable
cleaning agents can alter or
discolour the surfaces.
See the information on "Cleaning
agents" at the beginning of this
section.
Clean the surfaces with a clean
sponge and a solution of warm water
and washing-up liquid. A clean, damp
microfibre cloth without cleaning
agent can also be used.
After cleaning, wipe with clean water
and dry with a soft cloth.
CleanSteel (edt/cs) – appliance front
Risk of damage as a result of
incorrect cleaning.
The surface coating will be
damaged.
Do not use a stainless steel
cleaner on this surface.
The appliance front has a high quality,
special finish. This finish is resistant to
soiling and is very easy to clean.
Advertisement
Table of Contents
