Cleaning And Maintenance - Baumatic BMEO6E10M Instruction Manual

CLEANING AND MAINTENANCE

Proper routine maintenance and cleaning of
the oven can significantly extend its trouble-
free operation.
Turn off the oven before cleaning.
Do not begin cleaning until the
oven has cooled.
l Clean the oven after each use. When
cleaning the oven turn on lights to improve
visibility of the interior.
l To clean the oven chamber use only warm
water and a small amount of washing-up
liquid.
l Steam Cleaning
Proceed as described in the section Using
the control panel.
When the steam cleaning process is
completed, wipe out the chamber with a
damp cloth or a sponge soaked in a mild
solution of washing-up liquid.
l After cleaning wipe over chamber dry.
l Use a soft, moisture absorbing cloth to
clean surfaces.
Important!
Do not use any abrasive agents,
harsh detergents or abrasive ob-
jects for cleaning.
Only use warm water with a small
amount of dishwashing liquid to
clean the front of the appliance.
Do not use washing powders or
creams.
Replacement of the oven light bulb
In order to avoid the possibility of an
electric shock ensure that the appliance
is switched off before replacing the bulb.
● Set all control knobs to the position "●"/"0"
and disconnect the mains plug,
● unscrew and wash the lamp cover and
then wipe it dry.
● unscrew the light bulb from the socket,
replace the bulb with a new one – a high
temperature bulb (300°C) with the follow-
ing parameters:
- voltage 230 V
- power 25 W
- thread E14.
Oven light bulb
● Screw the bulb in, making sure it is prop-
erly inserted into the ceramic socket.
● Screw in the lamp cover.
27