Cleaning And Maintenance; Pyrolytic Cleaning - Baumatic B485SS Instruction Manual

Cleaning and maintenance

External cleaning operations must only be carried out
when the
disconnected from your mains supply.
o The oven should be thoroughly cleaned before it is operated for
the first time. The pyrolytic cleaning process listed below should
be followed AT LEAST once a month or more frequently if there
have been food spillages inside of the cavity.

Pyrolytic cleaning

o IMPORTANT: All accessories must be removed from inside
the oven before commencing
function.
o The oven should not be left unattended when the pyrolytic
cleaning cycle is in progress.
o All major food residues must be removed from the oven
before starting this function.
o Select the pyrolytic cleaning function by turning the oven
function selector knob to the cleaning symbol (as shown on page
17).
o On this oven function it is possible to increase the oven
temperature to 475°C; you should do this by turning the
thermostat control knob to its maximum setting.
o A cleaning cycle of 90 minutes will be automatically set. This
should be sufficient if the pyrolytic cleaning cycle is completed
on a weekly basis.
o You can program a cleaning cycle of 180 minutes by pressing the
manual operation button (9). This should be selected if the oven
is particularly dirty.
o The oven door will automatically lock when the temperature
inside the oven reaches 300°C. When this happens, the oven will
give off an acoustic signal and the light underneath the key
symbol on the control panel will light to indicate that the door is
locked.
o During pyrolytic cleaning, the oven light will not switch on.
oven is cool and with the
the pyrolytic cleaning
appliance
19