Polaris 550 Shift 136 Owner's Manual For Maintenance And Safety page 73

Lubrication
Chaincase Oil
Oil Change
1. Position the vehicle on a level surface.
2. Remove the drain plug (4) and drain
the oil into a drain pan. Allow the oil
to drain completely.
3. Clean off all metal shavings from the
plug.
4. Install a new sealing washer on the
drain plug.
Tip: The sealing surfaces on the drain plug and the oil tank should be clean and
free of burrs, nicks or scratches.
5. Reinstall the drain plug. Torque to 6-10 ft. lbs. (8-13 Nm).
6. Remove the fill plug. Clean off all metal shavings from the plug.
7. Add 9 oz. (265 ml) of the recommended oil. Do not overfill.
8. Reinstall the fill plug, making sure it is seated properly.
MAINTENANCE
4
69