Level
Functions
II
The headlamps come on.
•
Warning/indicator lamps illuminate
•
for 5 seconds.
Several other systems are acti-
•
vated. However, heating in seat
cushions and the rear window can
only be activated after the car has
been started.
This ignition position consumes a
lot of current from the battery and
should therefore be avoided!
A
Also activated when the door is opened.
Related information
Starting the car (p. 400)
•
Adjusting the steering wheel (p. 193)
•
Using jump starting with another battery
•
(p. 438)
Selecting ignition mode (p. 403)
•
Selecting ignition mode
The car's electrical system can be set in different
levels/positions and in this way make the differ-
ent functions available.
Selecting ignition position
Start knob in the tunnel console.
Ignition position 0 – Unlock the car and
•
store the remote control key inside the car.
NOTE
To reach level I or II without starting the
engine - do not depress the brake pedal, or
the clutch pedal for cars with manual gear
changing, when these ignition positions are to
be selected.
STARTING AND DRIVING
Ignition position I – Turn the start knob
•
clockwise and release it. The control auto-
matically returns to its starting position.
Ignition position II – Turn the start knob
•
clockwise and hold it in position for
approx. 5 seconds. Then release the knob,
which automatically returns to its starting
position.
Back to ignition position 0 – To return to
•
ignition position 0 from position I and II –
Turn the start knob clockwise and release.
The control automatically returns to its star-
ting position.
Related information
Starting the car (p. 400)
•
Switching off the car (p. 401)
•
Ignition positions (p. 402)
•
Adjusting the steering wheel (p. 193)
•
Using jump starting with another battery
•
(p. 438)
403