Volvo S60 2018 Owner's Manual page 268

KEY, LOCKS AND ALARM
Private locking
The boot lid and rear seat backrest can be
locked with the private locking function when the
car is taken in for service, left at a hotel or simi-
lar. The function prevents the boot lid from being
opened and locks the rear seat backrest in
upright position.
The private locking function
button is located in the centre
display function view. Depend-
ing on the current status of the
Private Locking
lock,
Unlocked
Locked is shown.
Related information
Activating and deactivating private locking
•
(p. 266)
266
Activating and deactivating private
locking
Private locking is activated with a function button
in the centre display and an optional PIN code.
NOTE
The car needs to be in ignition mode I as a
minimum for the private locking function to be
activated.
Private locking has two codes:
A security code is created the first time the
•
or Private Locking
function is used.
A new PIN code is selected every time the
•
function is activated.
Enter the security code before using for
the first time
A security code needs to be selected during the
first time the function is used. It can then be used
to deactivate private locking if the selected PIN
code has been forgotten or lost. The security
code acts as a PUK code for all subsequent PIN
codes set for the private locking function.
Save the security code in a safe place.
To create a security code:
1. Press the button for private locking in the
function view.
> A pop-up window is shown.
2. Enter the preferred security code and press
Confirm
.
> The security code is saved. The private
locking function is now ready for activa-
tion.
Activate private locking
NOTE
When private locking is activated, the rear
seat must be in upright position for locking to
work.