Volvo S60 2018 Owner's Manual page 361

Hide thumbs Also See for S60 2018:
Table of Contents

Advertisement

Road Sign Information and Sensus
Navigation*
If the car is equipped with Sensus Navigation*,
speed information is read from the navigation
unit in the following cases:
On detection of signs that indirectly indicate
a speed limit, such as motorway, dual car-
riageway and city limit signs.
If a previously detected speed sign is
assumed not to apply any longer, but no new
sign has been detected.
NOTE
In certain markets, the Road Sign Information
function* is only available in combination with
Sensus Navigation*.
NOTE
If a downloaded third-party app is used for
navigation then there is no support for speed-
related information.
Related information
Road Sign Information* (p. 355)
90
Road Sign Information
Road signs are customised for each market – the one shown here is just an example.
91
Road Sign Information with speed
warning and settings*
Speed Limit Warning
The subfunction
90
Sign Information (RSI
) is optional – the driver
can choose to activate or deactivate this sub-
function.
Speed Limit Warning
warns the driver when the
applicable speed limit or a preselected "top
speed" is exceeded – this warning is repeated
once after approx. 30 seconds within the same
speed limit area unless the driver reduces the
speed.
Another warning is available only when the driver
has reduced the speed by at least 5 km/h
(3 mph) and then exceeds the speed limit again,
or when the car reaches a new/different speed
limit area.
The speed warning is given by
the driver display symbol
showing the applicable maxi-
mum permitted speed tempo-
rarily flashing when this speed
is exceeded.
A speed warning is always
given if the speed limit is
exceeded in connection with
for Road
speed camera information.
Settings
Adjust the limit for Speed Warning
The driver can select to receive a warning at a
higher speed than the signed speed.
Select limit for speed warning as follows:
1. Select
Settings
Road Sign Information
display's top view.
2. Select
Speed Limit Warning
> The function is activated and a speed limit
selector appears.
91
3. Adjust the limit for Speed Warning by press-
ing the up/down arrows on the screen.
Note that the function does not
give any consideration to
selected limit adjustment when
the driver display shows the
speed camera symbol.
DRIVER SUPPORT
My Car
IntelliSafe
in the centre
.
}}
359
* Option/accessory.

Advertisement

Table of Contents
loading

Table of Contents