Table of Contents
Advertisement
1886
Insert grommets found in the
holes in the blades, then secure each blade to a blade arm
with screws found in the
hardware bag.
Repeat x5
7
Ceiling Bracket
Downrod
Installing the Canopy
Lift the canopy into place so that
the screw holes are aligned.
Installing the Blades:
hardware bag into the
Note:
Fan style may vary.
Hanging Fan
Insert the two canopy screws
found in the
Note:
Fan style may vary.
Lightly attach the blade arms to the motor with
the blade arm screws, then securely tighten
after both screws are attached.
Wiring
Canopy
hardware bag.
bag
bag
bag
IMPORTANT
NOTE: Follow the instructions on the blade. Installing it
incorrectly could result in your fan not functioning.
Remember the screws that you
kept after removing the shipping
blocks? You need them here.
Blade Arm Screw
Repeat x5
Blades
Light
x2
Canopy Screw
Canopy Screw
x15
Blade Screw
x15
Grommet
x10
Glass/Bulbs
Advertisement
Table of Contents
