Table of Contents
Advertisement
Onboard Graphics
The X10SRH-CLN4F provides onboard grpahics with a AST 2400 graphics control-
ler.
1-3
Server Chassis Features
The SC847BE1C-R1K28LPB is a 4U form factor chassis designed to be used in
a storage configuration. The following is a general outline of the main features of
the chassis.
System Power
The SC847BE1C-R1K28LPB features a redundant (two separate power modules)
1280W high-efficiency power supply with I
you to replace a failed power supply without shutting down the system.
Hard Drives
The SC847BE1C-R1K28LPB chassis was designed to support 36 dual-channel
SATA/SAS hard drives (24 on the front of the chassis and 12 located on the rear
of the chassis), which are hot-swappable units.
Front Control Panel
The control panel on the front of the chassis provides you with system monitoring
and control. LEDs indicate system power, HDD activity, network activity, system
overheat/fan fail and power supply failure. A main power button and a system reset
button are also included. In addition, two USB ports and a COM port have been
incorporated into the front of the chassis for convenient access.
Cooling System
The SC847BE1C-R1K28LPB chassis includes seven 8-cm hot-plug system cooling
fans located in the middle section of the chassis. An air shroud channels the airflow
from the system fans to efficiently cool the processors and memory. Two additional
8-cm fans are located at the back of the chassis to expel hot air from the system.
Each power supply module also includes a cooling fan.
C. This power redundancy feature allows
2
1-3
Chapter 1: Introduction
Advertisement
Table of Contents
