Resetting Fast Access For The Answering Machine Using Key 1; Operating When On The Move (Remote Operation) - Siemens Gigaset C595 User Manual

Information about call acceptance
In mode, the following applies
Automatic
for ring delay:
u
If there are no new messages, the
answering machine accepts a call after
18 seconds.
u
If new messages are present, the
answering machine accepts a call after
10 seconds.
When operating remotely (
you can tell after approx. 15 seconds that
there are no new messages (otherwise the
answering machine would already have
accepted your call). There will be no call
charges if you hang up now.
Please note:
You can configure your telephone so that
the first ring is suppressed on all calls
¢
( page 45). This means that the time
selected for call acceptance predeter-
mines how long the caller must wait
before the answering machine answers
the call.
•
Resetting fast access for the
answering machine using key 1
By default, key has been assigned for
fast access to the integrated answering
machine. However, if you have set the net-
work mailbox for fast access (
you can reset this setting.
¢ ¢
Ì
v
Set Key 1
Answering Machine
Select and press
Once you have selected the answering
machine, press and hold key . You
will be connected directly.
The setting for fast access applies to all
registered handsets.
Operating the answering machine of the Gigaset C595 base
¢
page 51)
¢
page 53),
.
§OK§
Operating when on the move
(remote operation)
You can check and activate your answer-
ing machine from any other telephone
(hotel, pay phone etc.), or initiate ring-
back from the answering machine with an
SMS.
Preconditions:
u
You have set a system PIN other than
¢
0000 ( page 66).
u
The phone you are using for remote
operation has tone dialling (DTMF),
i.e. you hear different tones when you
press the keys. Alternatively, you can
use a code transmitter (available from
a retailer).
Calling the answering machine and
playing back messages
~
Dial your own number.
9 ~
When you hear your
announcement, press 9 and
enter the system PIN.
You will be informed whether any new
messages have been recorded. The mes-
sages are now played back. You can now
operate the answering machine with the
keypad.
The following keys are used for operation:
A
To return to the start of the
current message.
Press twice to go back to the
previous message.
B
Stop playback. Press again to
resume.
3
Go to the next message.
0
Delete current message.
51