Call Divert (Cd); Consultation Call, Call Swap - Siemens Gigaset C595 User Manual

Call divert (CD)

When diverting a call, the call is forwarded
to another connection.
The following options are available:
u
All Calls: Calls are diverted immediately.
No more calls are signalled on your
phone.
u
No Answer: Calls are diverted if no one
accepts the call within several rings.
u
When Busy: Calls are diverted when
your line is busy. Call is diverted with-
out a call waiting tone.
¢ ¢
v Ç
All Calls
¤
Change multiple line input:
When:
Select /
All Calls When Busy
Phone Number:
Enter the number to which the call is to
be diverted.
Status:
Activate/deactivate call divert.
Press the display key.
§Dial§
a
After the announcement,
press the end call key.

Consultation call, call swap

These functions enable you to
u
Call a second external caller
(consultation call call)
u
Switch between two calls (call swap)
Consultation call
You can call a second external caller.
The first call is placed on hold.
During an external call:
Press the display key.
§Ext.Call§
The previous call is placed on
hold. The other participant
hears an announcement.
~
Enter the second participant's
telephone number.
¢
Call Divert
/
No Answer.
Making calls using network services
The phone number is dialled. You are
connected to the second participant.
If the caller does not answer, select the
display key to return to the first
§End§
participant.
Please note
You can also select the second partici-
pant's phone number from the direc-
¢
tory ( page 34) or the calls list
¢
( page 36).
Ending a consultation call
¢
End Active Call
§Options§
You are reconnected to the first caller.
You can also end the consultation call by
selecting the end call key. The connection
is briefly interrupted and you will be called
back. Once you have pressed the talk key
you are reconnected to the first caller.
Call swapping
You can speak to both callers one at a time
(call swap).
Precondition: You are conducting an
external call and have called a second par-
ticipant (consultation call) or have
accepted a waiting call.
¤
Use q to swap between the partici-
pants.
The caller you are currently speaking to is
æ
marked with the
End the current call
¢
End Active Call
§Options§
You are re-connected to the waiting caller.
icon.
31