1. Install the battery.
2. Install the
base
cover.
3. Follow the procedure
after working inside your
Solid state drive
Removing the solid state drive
1. Follow the procedure in
2. Remove the
base
cover.
3. Remove the battery.
1.
NOTE:
This procedure illustrates a M.2 2280 SSD. M.2 2230 SSD is secured to the palmrest with special bracket and
plate.
Loosen the three captive screws that secure the SSD bracket to the palmrest [1].
2. Remove the SSD plate from the top of the SSD [2].
computer.
before working inside your
computer.
Removing and installing components
27