Display Cable; Removing The Display Cable - Dell Latitude 7400 Service Manual

Hide thumbs Also See for Latitude 7400:
Table of Contents

Advertisement

1. Install the
display
panel.
2. Install the hinges.
3. Install the
display
bezel.
4. Install the
hinge cap
5. Install the
display assembly
6. Install the battery.
7. Install the
base
cover.
8. Follow the procedure
after working inside your

Display Cable

Removing the display cable

1. Follow the procedure in
2. Remove the
base
cover.
3. Remove the battery.
4. Remove the
display
assembly.
5. Remove the
hinge
cap.
6. Remove the
display
bezel.
7. Remove the hinges.
8. Remove the
display
panel.
1. Peel back the adhesive tape securing the display cable to the camera-microphone module [1].
2. Gently peel off the display cable from its routing channel on the display back cover [2].
computer.
before working inside your
computer.
Removing and installing components
63

Advertisement

Table of Contents
loading

This manual is also suitable for:

P100g

Table of Contents