Call Options; Private Call - Siemens SXG75 User Manual

Once a call has already been
established:
Open menu and select
§Options§
Hold
is put on hold.
J Dial a new number. When
the new connection is
established ...
... open menu and select
§Options§
Conference. The held call is
joined.
End
Ending all calls
B
All calls in the multiparty
conversation are ended
when the End key is
pressed.
Ending one call
See Ending calls, page 22.

Private call

You can remove a party from a con-
ference and make a private call to
that party while the conference is
put on hold.
Open menu and select
§Options§
Private. Then select the
entry for the private call.
You can swap between the private
call and the conference:
Open menu and select
§Options§
Swap.
call. The current call
When your private call is finished
you have the following options:
B
End the private call and
return to the conference.
Or
Open menu and select
§Options§
Conference. The private
call is joined to the
conference again.

Call options

The following functions are only
available during a call:
Open menu.
§Options§
Mute call/
Mute sound
Speakerphone
Upgrade to
vid/
Switch to
voice
Transf ac-
cess'ry/
Transfer
phone
Calling
If switched off, the person
on the other end of the
line cannot hear you
(muting).
Also:
*
Press and hold
In video calls your video
is still shown on the other
end of the line.
Call via the loudspeaker.
Change the current voice
call to a video call or vice
versa. The current call is
ended and a new con-
nection with the same
partner is established.
Switch the sound of the
current call to the head-
set and back to the
phone.
23
.