Replacing The Oven Lamp - Beko WOS30200SS User Manual

MAINTENANCE AND CARE
WARNING
To avoid risk of serious
injury or death, allow oven
to cool completely before
opening the oven door.
5. When cleaning has completed,
the door will remain locked until a
safe tempeture is attained.
When cooled down, remove ash
and any dust or debris from the
interior of the oven with a damp
cloth.
Note: After a self-clean cycle,
remove soil deposits with vinegar
water.
7.1.5 REPLACING THE OVEN
LAMP
DANGER
BEFORE REPLACING
THE OVEN LAMP,
DISCONNECT POWER
TO THE APPLIANCE
AT THE MAIN FUSE OR
CIRCUIT BREAKER TO
AVOID THE RISK OF AN
ELECTRICAL SHOCK.
WARNING
To avoid risk of serious
injury, allow oven to cool
before replacing the oven
lamp. Hot surfaces may
cause burns!
Light bulb replacement is considered
a routine maintenance item.
The oven lamp is a special electric
light bulb that can resist up to 573°F
(300°C). See Technical Specifications
for details. Oven lamps can be
obtained from Authorized Service
Agents.
The oven lights can be illuminated by
touching the light key on the control
panel. The lights are switched on
when the door is opened or when the
oven is in a cooking cycle.
The oven lights are not illuminated
during self clean. Each light
assembly consists of a removable
lens and a light bulb, as well as a
light socket housing that is fixed in
place.
The position of lamp might vary from
the figure shown.
46