Charging The Phone; Turning The Phone On - BENQ-SIEMENS E61 User Manual

Siemens e61: user guide
Hide thumbs Also See for E61:
Table of Contents

Advertisement

Charging the phone

1. Insert the charger connector fully into the charger socket at the bottom
of your phone. Ensure that the connector is plugged in the right way
round.
2. Plug the charger into a power outlet.
Do not remove the battery while the phone is charging.
3. Once the phone is fully charged, remove the charger from both the
power outlet and the phone.
Please note:
It takes approximately 4 hours to fully charge a battery.
When the battery is weak, the phone will play an alert sound.
When the battery is discharged, the charging may not start immediately
when you plug in the connector. Wait 10 to 15 minutes for the phone to
begin charging.

Turning the phone on

1. Long-press
welcome animation.
To set a welcome message, go to: Settings > Display > Welcome
Message. For details, please refer to page 67.
In this user manual, "long-press" means to press and hold down a key
for about two seconds. "Press" means to press a key and release
immediately.
to turn the phone on. The phone will display the
Preparing your phone for use
3

Advertisement

Table of Contents
loading

Table of Contents