Call Setup; Call Waiting - Siemens CX75 User Manual

44 Setup

Call setup

¢ ¢
Call setup
C
T
¢
Select function.
Hide ID
If activated, your phone number will
not appear on the other party's dis-
play (depending on the service
providers).

Call waiting

If you are registered for this service,
you can check whether it is set and
you can activate/deactivate it.
Divert
You can specify when calls should be
diverted to your mailbox or other
phone numbers.
Setting up call divert (example)
Unanswered
Select Unanswered. (In-
cludes the conditions
I
reachable,
see below)
Confirm and select Set,
C
then enter the phone
number to which the call
will be diverted.
Confirm. The setting is
§OK§
confirmed by the
network.
b
b
b
Not
No reply, Busy,
All calls
All calls are diverted.
Icon in the top line of the
display in standby mode.
Ç
Other possibilities for divert:
Not reachable, No
fax, Receiving data
Call screening
Only calls from phone numbers that
are in the Phonebook/Addressbook
or assigned to a group are signalled.
Other calls are only displayed.
Any key answ.
Incoming calls can be accepted by
pressing any key (except for
Minute beep
During the call, you (and only you)
will hear a beep after each minute as
a reminder of the time elapsed.
reply, Busy, Receiving
B
b
b
).