Call Setup - Siemens CX65 User Manual

88 Setup

Call setup

¢ ¢
Call setup
C
T
¢
Select function.
Hide ID
When you make a call, your phone
number can be displayed on the
recipient's display (depending on the
service providers).
To suppress this display, you can
enable the "Hide ID" mode for all sub-
sequent calls or just for the next call.
You may need to register separately
with your service provider for these
functions.
Call waiting
If you are registered for this service,
you can check whether it is set and
you can activate/deactivate it.
Divert
You can specify the conditions for
which calls should be forwarded to
your mailbox or other numbers.
Status check
You can check the current forward-
ing status for all conditions. After a
short pause, the current situation is
transmitted via the network and dis-
played.
Ö
Õ
Ô
b
Clear all
All set forwarding is cleared.
Set up call forwarding (example)
The most common condition for call
forwarding is, for example:
Unanswered
I
b
C
Set
C
/
Ï
J
C
Condition set.
Not set.
Display if status is
unknown (e.g. with a new
SIM card).
Select Unanswered.
(Includes the conditions
Not reachable, No
Busy, see below)
Confirm.
Select.
Confirm.
Select or enter the phone
number to which the calls
are to be forwarded.
Use existing mail-
§Mailbox§
box phone numbers, or
enter them if necessary.
Confirm. After a short
pause, the setting is con-
firmed via the network.
b
b
reply,