Phone Setup; Call Screening; Phone Identity - Siemens C75 Operating Manual

44 Setup
All calls
All calls are diverted.
Icon in the top line of the
display in standby mode.
Ç
Other possibilities for divert:
Not reachable, No
Receiving fax, Receiving data

Call screening

Only calls from phone numbers that
are in the Phonebook/Addressbook
or in a group are signalled. Other
calls are only displayed.
Any key answ.
Incoming calls can be accepted by
pressing any key (except for
Minute beep
During the call, you (and only you!)
will hear a beep after each minute as
a reminder of the time elapsed.
reply, Busy,
B
b

Phone setup

¢
C
¢
Key tones
Set the type of acoustic key acknow-
ledgement.
Info tones
Set service and alarm tones.
Auto off
The phone switches off each day at
the set time.

Phone identity

).
The phone identity number (IMEI) is
displayed. This information may be
useful for customer service.
§More§
Device check
After the last information page,
a self-test as well as individual test
are offered. If you select Selftest, all
individual test are carried out.
Software version
Display in standby mode:
*
# 0 6 #, then press §More§.
¢
Phone setup
T
Select function.
Press several times to dis-
play additional informa-
tion about the device.