3
1
2
3
Release 00 - 03.2017
3
Sollevare la copertura e successivamente ruotarla per
sfilarla dall'erogatore.
4.3. Rimozione TMBU
Eseguire le operazioni descritte nei paragrafi 4.1 e 4.2.
Togliere il tubo indicato in figura.
1
Sganciare i punti indicati, sollevare leggermente e spo-
2
stare il supporto scheda verso la parte posteriore della
macchina.
3
Sollevare completamente la leva.
Rimuovere la clip ferma-tubo dell'erogatore caffè e sfila-
re il relativo tubo.
3
Lift the cover and then turn it to remove it from the
dispenser.
4.3. Removing the TMBU
Follow the steps described in paragraphs 4.1 and 4.2.
1
Remove the tube shown in the picture.
2
Release the points shown, lift slightly and move the
board support towards the back of the machine.
3
Lift the lever fully.
Remove the coffee dispenser tube-holder clip and the
tube.
40/56
Lattissima ONE
Riparazione
Repair