5
6
1
2
Release 00 - 03.2017
5
Spingere leggermente verso la parte anteriore della mac-
china il pannello sinistro e rimuoverlo ruotandolo verso
l'esterno.
6
Spostare leggermente verso la parte anteriore della mac-
china il pannello destro e ruotarlo verso l'esterno per ri-
muoverlo.
Prestare attenzione a non danneggiare i denti di fis-
saggio dei fianchi e del telaio.
4.2. Rimozione copertura superiore
Eseguire le operazioni descritte nei punti precedenti 1-6 del
paragrafo 4.1.
1
Scollegare il connettore dalla scheda di potenza.
2
Scollegare il connettore dalla scheda anteriore come in-
dicato in figura.
Eseguire queste operazioni con cautela.
5
Push the left panel slightly towards the front of the
machine and remove it by turning it outwards.
6
Move the right panel slightly towards the front of the
machine and remove it by turning it outwards.
Be careful not to damage the fixing teeth of the side
panels and frame.
4.2. Removing the upper cover
Follow steps 1-6 as described in paragraph 4.1.
1
Disconnect the connector from the power board.
2
Disconnect the connector from the front board as shown
in the picture.
Do these operations with caution.
39/56
Lattissima ONE
Riparazione
Repair