Table of Contents
Advertisement
Driving the Machine
Positioning one lever too far in front of the other causes the machine to spin very
rapidly. As a result, you may lose control of the machine, causing personal injury to
you and damage to the machine.
Slow down the machine before making sharp turns.
The drive wheels turn independently, powered by motors on each axle. You can turn 1 side
in reverse while you turn the other forward, causing the machine to spin rather than turn.
This greatly improves the machine maneuverability but may require some time for you to
adapt to how it moves.
1. Move the motion-control levers down to the center, unlocked position.
Operation: During Operation
CAUTION
G426843s
Page 4–12
Motion-control levers—P
position
Center, unlocked position
Forward
Reverse
Front of the machine
ARK
3464-625 A
Advertisement
Table of Contents
