Table of Contents
Advertisement
Introduction
AVERTISSEMENT : L'appareil émet une lumière invisible (équipement de classe 1) en
This section contains the following topics:
•
•
•
About this Guide
This guide contains installation, configuration, and operating information for the following
Extron decoders:
•
•
NOTE: In this manual:
Two versions of decoder are documented in this guide. They are categorized by the type of
fiber optic cable, multimode (MM) or singlemode (SM), which defines the effective range of
transmission:
•
•
WARNING:
This unit outputs continuous invisible light (Class 1 rated), which
may be harmful to the eyes; use with caution.
•
Do not look into the rear panel fiber optic cable connectors or into the fiber optic
cables themselves.
•
For additional safety, plug the attached dust caps into the optical transceivers when
the fiber cable is unplugged.
continu, à utiliser avec précaution.
•
Ne regardez pas dans les connecteurs de câble fibre optique sur le panneau arrière
ou dans les câbles fibre optique eux-mêmes.
•
Pour une sécurité renforcée, associez les bouchons anti-poussière à l'ensemble
émetteur/récepteur optique lorsque le câble fibre optique est débranché.
About this Guide
About the NAV System
Features
NAV 10SD 501 Scaling Decoder — Receives HDMI video, audio, and RS-232 and IR
communications via a managed 10G IP network using multicast streaming technology.
Also supports USB and Ethernet extension.
NAV 10SD 101 Scaling Decoder — Receives HDMI video, audio, and RS-232 and IR
communications via a managed 10G IP network using multicast streaming technology.
•
The NAV 10SD 501 and NAV 10SD 101 are both referred to as a "decoder." They
are referenced by model name when differences exist.
•
NAV decoders and encoders collectively are referred to as "endpoints."
Multimode decoder — Long distance, up to 400 m (1312 feet)
Singlemode decoder — Very long distance, up to 10 km (6.25 miles)
NAV 10SD 501 and NAV 10SD 101 Scaling Decoders • Introduction
1
Advertisement
Table of Contents
