Table of Contents
Advertisement
Introduction
AVERTISSEMENT : L'appareil émet une lumière invisible (équipement de classe 1) en
This section contains the following topics:
•
•
•
About this Guide
This guide contains installation, configuration, and operating information for the NAV SD 511
Scaling Decoder, which receives HDMI video, audio, and RS-232 and IR communications
via a managed IP network using multicast streaming technology.
NOTE: In this manual:
Two versions of decoder are documented in this guide. They are categorized by the
type of fiber optic cable, multimode or singlemode, which defines the effective range of
transmission:
•
•
About the NAV System
The Extron NAV decoders and one or more compatible encoders form an AV distribution
and switching matrix on an Internet Group Management Protocol (IGMP) Managed IP
Network. The encoders are configured for low latency multicast streaming. The decoders
are configured to join the assigned multicast group.
WARNING:
This unit outputs continuous invisible light (Class 1 rated), which
may be harmful to the eyes; use with caution.
•
Do not look into the rear panel fiber optic cable connectors or into the fiber optic
cables themselves.
•
For additional safety, plug the attached dust caps into the optical transceivers when
the fiber cable is unplugged.
continu, à utiliser avec précaution.
•
Ne regardez pas dans les connecteurs de câble fibre optique sur le panneau arrière
ou dans les câbles fibre optique eux-mêmes.
•
Pour une sécurité renforcée, associez les bouchons anti-poussière à l'ensemble
émetteur/récepteur optique lorsque le câble fibre optique est débranché.
About this Guide
About the NAV System
Features
•
The NAV SD 511 is referred to as a "decoder."
•
NAV decoders and encoders collectively are referred to as "endpoints."
Multimode fiber — Long distance, up to 550 m (1804 feet)
Singlemode fiber — Very long distance, up to 10 km (6.25 miles)
NAV SD 511 Scaling Decoder • Introduction
1
Advertisement
Table of Contents
