Advertisement
Quick Links
·
Please read these instructions carefully to familiarize
yourself with the required tools, materials, and installation
sequences. Follow the sections that pertain to your
particular installation. This will help you avoid costly
mistakes. In addition to proper installation, read all
operating and safety instructions.
·
All information in these instructions is based upon the
latest product information available at the time of
publication. Kohler China reserves the right to make
changes in product characteristics, packaging, or
availability at any time without notice.
·
These instructions contain important care, cleaning, and
warranty information -
consumer
.
ORDERING INFORMATION
AERODYNE 3/4.8L CLASS FIVE + 1 PC Toilet 305mm
.......... ...................................................................K-3869T
Includes
Toilet Seat
AERODYNE 3/4.8L CLASS FIVE + 1 PC Toilet 305mm
..........................................................................K-3869T-S
Includes
Quiet-Close Toilet Seat
AERODYNE 3/4.8L CLASS FIVE + 1 PC Toilet 400mm
......... ....................................................................K-4165T
Includes
Toilet Seat
AERODYNE 3/4.8L CLASS FIVE + 1 PC Toilet 400mm
..........................................................................K-4165T-S
Includes
Quiet-Close Toilet Seat
NOTES
·
Observe all local plumbing and building codes.
·
Shut off the water supply.
·
Seat post holes are on 140mm (5-1/2") centers.
·
51mm (2") passageway.
·
Water depth from the rim is 160mm.
·
Ensure that the new drain has the correct roughing-in
dimension. This toilet has a 305/400mm roughing-in
dimension.
See Fig. #1
·
The flexible hose must be no less than 450mm.
·
Closet flange must be 305
·
Carefully inspect the new fixture for any sign of damage.
·
For new construction, refer to the dimensions in
and Fig. #3
for locating the shut-off valve.
·
Fixture dimensions are nominal and conform to tolerances
established by ASME Standards (A112.19.2-2008).
WARNING: Risk of personal injury or product
damage
: Handle vitreous china products very carefully.
Vitreous china can break and chip if you overtighten
bolts and nuts.
WARNING: Risk of external leakage
nut has been factory-tightened to design specifications.
If re-tightening is required, wrench tighten one turn
past finger tight .
1195897-T01-C
please leave instructions for the
.............................................K-4169T
.........................K-4141T
.............................................K-4169T
.........................K-4141T
.
/400
mm on-center from wall.
. The fill valve
AERODYNE 3/4.8L CLASS FIVE +
VITREOUS CHINA SKIRTED TRAPWAY ONE-PIECE TOILET
·
·
·
3/4.8
...............................................................................K-3869T
3/4.8
...........................................................................K-3869T-S
3/4.8
...............................................................................K-4165T
3/4.8
...........................................................................K-4165T-S
·
·
·
·
51mm
·
·
305/400mm(
·
·
·
·
Fig. #1
·
·
2008.
-1-
3/4.8
INSTALLATION INSTRUCTIONS
S-TRAP 305mm K-3869T/K-3869T-S
S-TRAP 400mm K-4165T/K-4165T-S
305mm
........................K-4169T
305mm
.................K-4141T
400mm
........................K-4169T
400mm
.................K-4141T
140mm
160mm
1)
450mm
305
/400
mm
1
3
ASME
Copyright Kohler China Ltd., 2013
-
A112.19.2-
, 2013
Advertisement
Related Manuals for Kohler S-TRAP K-3869T
Summary of Contents for Kohler S-TRAP K-3869T
- Page 1 · · All information in these instructions is based upon the latest product information available at the time of publication. Kohler China reserves the right to make changes in product characteristics, packaging, or availability at any time without notice. ·...
-
Page 2: Tools And Materials Required
Reference Value Unit: mm K-3869T/K-3869T-S Finished Wall FRONT OF BOWL OF OUTLET K-4165T/K-4165T-S Finished Wall FRONT OF BOWL Fig.#1 Kohler reserves the right to change marked dimensions without prior notice. 1195897-T01-C... -
Page 3: Installation
The expansion of cement due to a rise in temperature may make the toilet crack or cause damage. Kohler is not responsible for any damage caused by installation with the use of cement. TO INSTALL SUPPLY... - Page 4 Install brackets. Fig.#6 Plastic Trap Outlet Firmly press the toilet gasket onto the toilet outlet of plastic trap. Toilet Gasket NOTE 1: Wax ring type toilet gasket should not be installed at temperatures less than 21 C. NOTE 2: If you are using a toilet gasket with an integral plastic sleeve, Fig.#7 make sure the gasket is positioned...
- Page 5 Apply caulk around base. Fig.#12 The two holes at back of the toilet are for the convenience of fill valve and flexible hose installation in case of maintenance. Fig.#13 TO CONNECT WATER SUPPLY Supply Shank* * Flexible hose (not provided) are recommended to connect the supply Supply Shut-Off Valve line to the fill valve.
- Page 6 Install the tank lid and the seat. Use the supplied hardware pack for seat. Periodically check for leaks for several days following the installation. Connect the push button and flush valve. Fig.#15 FILL FLOAT WITH BALLAST Test flush the toilet. Check all connections for leakage for several days.
- Page 7 1195897-T01-C...
-
Page 8: Consumer Responsibilities
CAUTION: Don t use any cement while installing the toilet. Heat expansion of the toilet may damage the feet of the toilet. Kohler will not be responsible for any damage because of using cement. WARNING: Risk of product damage. Do not throw into the toilet what is easy to block it, such as newspaper, paper pilch, sanitary towel.