Advertisement
Quick Links
·
Please read these instructions carefully to familiarize
yourself with the required tools, materials, and installation
sequences. Follow the sections that pertain to your
particular installation. This will help you avoid costly
mistakes. In addition to proper installation, read all
operating and safety instructions.
·
All information in these instructions is based upon the
latest product information available at the time of
publication. Kohler China reserves the right to make
changes in product characteristics, packaging, or
availability at any time without notice.
·
These instructions contain important care, cleaning, and
warranty information -
please leave instructions for the
consumer
.
ORDERING INFORMATION
BANCROFT
Two-Piece Toilet ..................................K-3827T
TM
Includes Bowl..........................................................K-4067
Includes Tank .........................................................K-4383
Includes French Curve Toilet Seat......................K-4653T
BANCROFT
Two-Piece Toilet ..............................K-3827T-C
TM
Includes Bowl..........................................................K-4067
Includes Tank ...........................................................K-4383
Includes French Curve Quiet-close Toilet Seat .......K-4713T
®
NOTES
·
Observe all local plumbing and building codes.
·
Shut off the water supply.
·
Seat post holes are on 140mm (5-1/2") centers.
·
Ensure that the new drain has the correct roughing-in
dimension. This toilet has a 305mm roughing-in
dimension.
See Roughing-in
·
4.8L water usage.
·
Closet flange must be 305mm on-center from wall.
·
Carefully inspect the new fixture for any sign of damage.
·
For new construction, refer to the dimensions in
installation step
for locating the shut-off valve.
·
Fixture dimensions are nominal and conform to tolerances
established by ASME Standards (A112.19.2-2003).
WARNING: Risk of personal injury or product
damage
: Handle vitreous china products very carefully.
Vitreous china can break and chip if you overtighten
bolts and nuts.
WARNING: Risk of external leakage
nut has been factory-tightened to design specifications.
If re-tightening is required, wrench tighten one turn
past finger tight .
1178216-T01-A
®
.
. The fill valve
·
·
·
.....................................................................K-4067
.....................................................................K-4383
.....................................................................K-4067
.....................................................................K-4383
·
·
·
·
)
·
4.8L
·
·
·
·
2003)
(
)
158
200436
-1-
BANCROFT
INSTALLATION INSTRUCTIONS
VITREOUS CHINA TWO-PIECE TOILET
K-3827T/K-3827T-C
.......................................................K-3827T
......................................K-4653T
....................................................K-3827T-C
......................................K-4713T
140mm
305mm
ASME
Copyright Kohler China Ltd., 2011
TM
-
305mm (
(A112.19.2-
, 2011
Advertisement
Related Manuals for Kohler BANCROFT K-3827T
Summary of Contents for Kohler BANCROFT K-3827T
- Page 1 · · All information in these instructions is based upon the latest product information available at the time of publication. Kohler China reserves the right to make changes in product characteristics, packaging, or availability at any time without notice. ·...
-
Page 2: Tools And Materials Required
Unit: mm Finished Wall Front of Bowl Supply C L of Outlet Kohler reserves the right to change marked dimensions without prior notice. INSTALLATION INSTALLATION Install T-bolts and a new wax ring. Remove the rag if the Apply weight evenly. - Page 3 Install the washers and nuts as shown. If needed, cut off the T-bolt before installing the bolt cap. Do not overtighten! Tighten the tank bolts evenly. Adjust the tank bolts to level the tank. Do not overtighten! Connect supply and turn on the water. Flush several times and check for leaks.
- Page 4 A. Partially close the water supply shut-off valve if the water pressure to the toilet is too tank is filling. high. Check the toilet performance following any such adjustment. B. Remove dirt or obstructions from the valve head. Flush the lines.the lines. IMPORTANT: Use only genuine Kohler parts as shown to avoid property damage. 1178216-T01-A...
-
Page 5: Consumer Responsibilities
CAUTION: Don’t use any cement while installing the toilet. Heat expansion of the toilet may damage the feet of the toilet. Kohler will not be responsible for any damage because of using cement. WARNING: Risk of product damage. Do not throw into the toilet what is easy to block it, such as newspaper, paper pilch, sanitary towel.