Selecting The Display Modes - Sharp Wizard OZ-570 Operation Manual

Selecting the Display Modes

Once an application is open, you can switch between three
basic display modes: Index, View and Edit. Each display mode
has its own unique appearance and particular purpose. Index
mode is normally the default view when an application is
opened, and provides a summary of the individual entries that
have been created. Pressing [ENTER] after selecting a
particular entry causes the entry to be displayed in View mode,
which shows the full details of the entry.
Pressing [EDIT], either when an entry is displayed in View mode
or is selected in Index Mode, causes the entry to be displayed
in Edit mode. The entry's details can then be altered as desired.
Edit mode is also used when an entry is being created (by
pressing [NEW]).
* The Calc (except Conversion function) and Clock
applications do not have Index, View or Edit modes.
Index mode
The Index mode of Tel and User File shows you a two lines
view of each entry within the application while the Index mode
of the rest of the applications shows you a one line view of
each entry. This allows you to easily find a particular entry,
which you can then display in full (View mode) by pressing
[ENTER].
2 0
Other operations:
[NEW] Creates a new entry for the current application
(in Edit mode).
[EDIT] Displays the currently selected entry and edits
it (Edit mode).
[DEL] Deletes the currently selected entry.
[PREV] Displays any previous/subsequent entries not
shown.
[NEXT]
[ ] [ ] Selects an entry.
[ ] Displays category menu and user can select a
category.
* Under the Index mode of Tel application,
be shown to indicate office phone number and home
phone number respectively.
and will