Power Adapter; How To Use - HoMedics mychill PERSONAL SPACE COOLER 2.0 Instruction Manual And Warranty Information

POWER ADAPTER

HOW TO USE

REPLACE
COOLING
CARTRIDGE
LED
POWER
Plug the power adapter into the back of the unit and the other end into a household electrical outlet.
Press the POWER button to turn the unit ON/OFF.
SPEED ADJUSTMENT
When the unit is powered ON, the default speed will be LOW, and one blue LED to the right of the FAN
button will illuminate. To increase the speed, press the FAN
and both blue LED lights will illuminate.
RUNTIME
This unit will provide up to 4 hours of runtime when the water tank and water reservoir are filled according
to the How to Fill instructions. This is based on a room temperature of 72°F / 22.2°C and relative humidity
of 42%. It is normal for runtime to vary based on room temperature and relative humidity.
LOW WATER INDICATOR
This unit is equipped with a Low Water LED. It will flash red, indicating the water tank needs to be
refilled. The pump will automatically turn off while the fan continues to run. At this time, please turn the
unit off and unplug it to refill the tank. Once a full tank is placed in the unit and the unit is turned back
on, the Low Water indicator is reset and the pump is turned on.
The Personal Space Cooler is equipped with a safety device that automatically shuts the unit off when
the top cover is removed from the water reservoir.
LOW WATER LED FAN SPEED - LOW / HIGH
POWER BUTTON
ON/OFF
HIGH SPEED LED
LOW SPEED LED
COOLING
CARTRIDGE
REPLACEMENT
button. The speed will change to HIGH