Hdmi Settings - Sony a9 II Help Manual

Note
• The lens or lens hood may block the infrared remote sensor that receive the
signals. Use the infrared remote commander in the position from which the
signal can reach the product.
• When [IR Remote Ctrl] is set to [On], the product does not switch to power
save mode. Set [Off] after using an infrared remote commander.
• An infrared remote commander cannot be used while [Bluetooth Rmt Ctrl] is
set to [On].

HDMI Settings

HDMI Resolution
When you connect the product to a High Definition (HD) TV with HDMI
terminals using an HDMI cable (sold separately), you can select HDMI
Resolution to output images to the TV.
MENU 
 desired setting.
Auto: The product automatically recognizes an HD TV and sets the output
resolution.
2160p/1080p: Outputs signals in 2160p/1080p.
1080p: Outputs signals in HD picture quality (1080p).
1080i: Outputs signals in HD picture quality (1080i).
Note
• If the images are not displayed properly using the [Auto] setting, select either
[1080i], [1080p] or [2160p/1080p], based on which TV is to be connected.
GB
196
(Setup)  [HDMI Settings]  [HDMI Resolution]