Removing The Stand; Setting The Tv On The Wall; Optional Accessory - Sharp AQUOS LC-60E78UN Operation Manual

Appendix

Removing the Stand

• Before detaching (or attaching) the stand, make sure to turn off the TV and unplug the AC cord.
CAUTION CAUTION • Do not remove the stand from the TV unless using an optional wall mount bracket to mount it.
1
Unfasten the four screws used to secure the
stand in place.
• To attach the stand, perform the above steps in reverse order.

Setting the TV on the Wall

CAUTION CAUTION • This TV should be mounted on the wall only with the wall mount bracket AN-52AG4 (SHARP). The use of
other wall mount brackets may result in an unstable installation and may cause serious injuries.
• Installing the TV requires special skill that should only be performed by qualifi ed service personnel.
Customers should not attempt to do the work themselves. SHARP bears no responsibility for improper
mounting or mounting that results in accident or injury.
Using an optional bracket to mount the TV
• You can ask a qualifi ed service professional about using an optional AN-52AG4 bracket to mount the TV on the
wall.
• Carefully read the instructions that come with the bracket before beginning work.
Hanging on the wall
AN-52AG4 wall mount bracket.
(See the bracket instructions for details.)
Vertical mounting
• Detach the cable clamp on the rear of the TV when using the optional mount bracket.
• To use this TV mounted on a wall, remove the covers at the 4 locations on the rear of the TV, and then use the
screws supplied with the wall mount bracket to secure the bracket to the rear of the TV.

Optional Accessory

The listed optional accessory is available for the Liquid
Crystal Television. Please purchase it at your nearest
shop.
• Additional optional accessories may be available in the near
future. When purchasing, please read the newest catalogue
for compatibility and check the availability.
2
Angular mounting
26
Detach the stand from the TV.
About setting the TV angle
AN-52AG4 • The center of the display:
1 63 /
0/5/10°
the " f " position.
• Refer to the operation manual of
AN-52AG4 for details.
Part name
Wall mount bracket
inches (50.0 mm) above
64
Model number
AN-52AG4