Lenovo 07ADA05 User Manual page 25

4. Remove the screw and slide the computer cover out of the chassis.
5. Install the new computer cover and secure the cover with the screw.
6. Place the computer in an upright position.
7. Reconnect all disconnected cables to the computer and reconnect the ac power adapter to the electrical
outlet.
Note: If a locking device is available, use it to lock the computer.
Front bezel
Prerequisite
Before you start, read Appendix A "Important safety information" on page 85 and print the following
instructions.
.
Chapter 4 CRU replacement
19