Kenmore Intuition BU4020 Use & Care Manual page 21

HEPA MEDIA EXHAUST FILTER CLEANING
2. Remove the HEPA media exhaust filter
from vacuum cleaner.
3. Wash with cold water only, DO NOT
use detergent or soap. Allow to air dry.
Allow parts to dry 24 hours before
putting back into vacuum cleaner.
NOTE:
DO NOT operate without post-
motor filter installed.
DO NOT wash in the dishwasher.
DO NOT install the filter if damp.
4. Reinstall the HEPA media exhaust filter
into the vacuum cleaner.
5. Insert the exhaust filter cover tabs into
the upper slots and lock the exhaust
filter cover into place by pressing the
release tab under the cover until a click
is heard.
HEPA
Media
Exhaust
Filter
NOTE:
cover is properly installed.
- 21 -
Make sure the exhaust filter
Slots
Tabs