Table of Contents
Advertisement
the LCD [2].
2. Press
[7] button a few times until "BASE" message will be displayed on the
LCD [2]. Press OK [8] button after that.
3. Press
[7] button a few times until "RECALL" message will be displayed on
the LCD [2].
4. Press OK [8] button, "RECALL: X" message will be displayed on the LCD [2]
(X= the line disconnection time from 1 to 5).
5. Choose the required line disconnection time using
80 ms, 2=100 ms, 3=180 ms, 4=300 ms 5=600 ms).
6. Press OK [8] button to confirm your choice and to exit to the previous menu
option.
7. Press CANCEL [10] button to exit this menu option.
Pause duration selection
1. Press OK [8] button, "PHONE BOOK" message will be displayed on the LCD
[2].
2. Press
[7] button several times until "BASE" message will be displayed on the
LCD [2].
3. Press OK [8] button.
4. Press
[7] button a few times until "PAUSE" message will be displayed on the
LCD [2].
5. Press OK [8] button, "PAUSE: X" message will be displayed on LCD [2] (X= the
pause duration from 1 to 4).
6. Choose the required duration using
tion: #1 = 1 s, #2=1.5 s, #3=2 s, #4=3 s).
7. Press OK [8] button to confirm your choice and to exit to the previous menu
option.
8. Press CANCEL [10] button to exit this menu option.
Main unit selection
Any handset can be registered at 4 main units at the same time.
There are two ways of selecting a main unit:
Automatic: The main unit selection happens automatically. When connection to
the main unit is broken or power supply is disconnected, a handset begins to
search and connect to any accessible main unit.
Fixed: When connection to the main unit is broken or power supply is discon-
nected, a handset begins to search and connects to the previously defined main
unit only.
1. Press OK [8] button, "PHONE BOOK" message will be displayed on the LCD
[2].
2. Press
[7] button a few times until "REGISTRATION" message will be dis-
played on the LCD [2].
[6] and
[7] buttons (1=
[6] and
[7] buttons (The pause dura-
Advertisement
Chapters
Table of Contents
