Setting And Adjusting The Projector (Settings & Adjustments); Setting The Security (Network - Security) - Sharp XG-C435X Setup Manual

Controlling the Projector via LAN
Setting and Adjusting the
Projector
(Settings & Adjustments)
Example: "Picture" screen display for COMPUTER1
On these screens, you can make projector
settings or adjustments. You can set or adjust
the following items :
Picture Mode
• • • • •
CLR Temp
• • • • •
Progressive (Video)
• • • • •
• • • • • Signal Type (Computer, DVI)
Dynamic Range (DVI)
• • • • •
Video System (Video)
• • • • •
Resolution Setting
• • • • •
Auto Sync
• • • • •
• • • • • Resize
• • • • • Auto Keystone
OSD Display
• • • • •
Background
• • • • •
Eco+Quiet Mode
• • • • •
• • • • • Auto Power Off
• • • • • System Sound
Menu Position
• • • • •
Auto Restart
• • • • •
Password
• • • • •
• • • • • Internal Speaker
• • • • • Audio Out
Projection Mode
• • • • •
Fan Mode
• • • • •
Monitor Out
• • • • •
• • • • • RS-232C Speed
• • • • • All Reset
Language
• • • • •
Note
• If you click the "Refresh" button before the
screen is displayed completely, an error mes-
sage ("Server Busy Error") will be displayed.
Wait for a moment and then operate again.
• You cannot operate this page while the pro-
jector is warming up.
• For details about each item, refer to the
projector's operation manual.
-26
Setting the Security
(Network – Security)
On this screen, you can make settings relat-
ing to security.
Items
User Name Setting of user name for
security protection.
Password Setting of password for
security protection.
Accept IP It is possible to set up to three
Address IP addresses allowing connec-
tion to the projector.
All IP No limits are set to IP addresses
Addresses connecting to the projector.
From only
For security improvement, only an
specific IP IP address set by "Address 1-3"
addresses can be connected to the projector.
Note
• User Name and Password can be up to 8
characters.
• You can input the characters below :
a-z, A-Z, 0-9, -, _
Description